| is available from 1,100 to 5,500 litres, and is totally enclosed in either gravity feed or pumped operation formats. For gravity feed applications the inner tank is mounted within the bund at sufficient height to ensure flow even at low fuel levels.
– Both the Light industrial & Economy range can be modified for the storage and dispensing of lubrication, hydraulic, transmission or similar oil grades. Dispensing can be by electric, manual or air pump and monitoring equipment ca be installed where appropriate.
The storage and disposal of waste oil can be a major source of concern especially when large volumes are involved. Ledbury Welding are able to offer several options based on the company’s portfolio of integrally bunded tanks, which can be readily adapted for either manual or automated waste oil filling and ready made disposal points.
Single skinned and double skinned rectangular tanks for commercial applications are produce up to the limits of BS799 Part 5 Type K. Such tanks will normally require installation within a bund to achieve EA acceptance.
Ledbury equipment cabinets are manufactures in four standards designs to provide a compact, free standing vehicle fuelling and maintenance centre. These environmental friendly units can incorporate lube oil storage and dispensing tyre inflator, pressure washer and hand washing facilities.
If you are enquiring from Ireland please contact our agent, Pumps & Fuel Installations at the below links. www.pumpsandfuel.com or emai info@pumpsandfuel.com |